Lenovo ThinkCentre M90t User Manual Download Page 71

Page: 71 / 126

7. Install the optical drive cage to the 3.5-inch secondary storage drive cage.

8. Install the optical drive cage to the chassis.

9. Connect the signal cable and the power cable to the 3.5-inch secondary storage drive.

10. Reinstall all the removed parts. Then, reconnect the power cord and all disconnected cables to the

computer.

Secondary storage drive

Prerequisite

Before you start, read Appendix A “Important safety information” on page 85 and print the following
instructions.

Attention:

The internal storage drive is sensitive. Inappropriate handling might cause damage and

permanent loss of data. When handling the internal storage drive, observe the following guidelines:

• Replace the internal storage drive only for upgrade or repair. The internal storage drive is not designed for

frequent changes or replacement.

Chapter 7

CRU replacement

Summary of Contents for ThinkCentre M90t































































































































Search results

Summary of Contents for ThinkCentre M90t

Reviews:

Related manuals for ThinkCentre M90t

Brands by name

Popular brands

Lenovo ThinkCentre M90t, User Manual

Search results

Summary of Contents for ThinkCentre M90t

Reviews:

Related manuals for ThinkCentre M90t

Brands by name

Popular brands