Lenovo ThinkCentre M90t User Manual Download Page 58

Page: 58 / 126

6. Install the storage drive with the bracket to the 3.5-inch primary storage drive cage.

7. Connect the signal cable and the power cable to the storage drive.

8. Reinstall all the removed parts. Then, reconnect the power cord and all disconnected cables to the

computer.

2.5-inch primary storage drive, storage drive converter, and bracket

1. Remove the computer cover. See “Computer cover” on page 42.

2. Disconnect the signal cable and the power cable from the 2.5-inch primary storage drive.

3. Pull the handle of the bracket to remove the storage drive converter with the bracket from the 3.5-inch

primary storage drive cage.

M90t User Guide

Summary of Contents for ThinkCentre M90t































































































































Search results

Summary of Contents for ThinkCentre M90t

Reviews:

Related manuals for ThinkCentre M90t

Brands by name

Popular brands

Lenovo ThinkCentre M90t, User Manual

Search results

Summary of Contents for ThinkCentre M90t

Reviews:

Related manuals for ThinkCentre M90t

Brands by name

Popular brands