Lenovo ThinkAgile MX Certified Node 2U, User Manual

Page: 78 / 104

1. If the server is installed with the security bezel, remove it first. See “Remove the security bezel” on page
83.
2. Use a flat-blade screwdriver to remove the ID label plate on the right rack latch and place it in a safe
place.
Figure 43. ID label plate removal
To remove the rack latches, complete the following steps:
Step 1. Do one of the following:
• If the rack latches are not assembled with a VGA connector or the front I/O assembly, go to the
next step.
• If the rack latches are assembled with a VGA connector, the front I/O assembly, or both,
complete the following steps:
74
User Guide forThinkAgile MX Certified Node 2U