Lenovo RackSwitch G7052, Installation Manual

Page: 45 / 86

© Copyright Lenovo 2015 Chapter 3: Installing G7052 Hardware and Options
45
5. Secure the switch to the front rack posts with M6 screws (Item 3), washers
(Item 5), and clip nuts (Item 4). Torque the screws to approximately 5.7 Nm +/-
0.1 Nm (50 inch-pounds).
6. Attach the rear alignment plate (Item 7) to the rear rack posts with M6 screws
(Item 3), washers (Item 5), and clip nuts (Item 4). Torque the screws to
approximately 5.7 Nm +/- 0.1 Nm (50 inch-pounds).
7. If installing the 1U air-duct option, see the instruction on page 47 .
8. Connect all external cables in accordance with the “Cabling Guidelines” on
page 34 .
5
3
4
7
3
5
4