Lenovo P70 User Manual Download

Page: 86 / 184

Table 2. Config menu items (continued)

Menu item

Submenu item

Value

Comments

Always On USB

• Disabled

•

Enabled

If you select

Enabled

, the

external USB devices can
be charged through USB
connectors even when the
computer is in low-power
mode (sleep, hibernate, or
power-off).

Note:

If you select

Enabled

, USB wake up

function is not supported
on Always On USB
connector.

– Charge in Battery Mode

•

Disabled

• Enabled

If you select

Enabled

, the

external USB devices can
be charged through USB
connectors even when
system is in hibernation or
power-off mode and in
battery mode.

Keyboard/Mouse

TrackPoint

• Disabled

•

Enabled

Enable or disable the built-
in TrackPoint pointing
device.

Note:

If you want to use an

external mouse, select

Disabled

Trackpad

• Disabled

•

Enabled

Enable or disable the built-
in trackpad.

Note:

If you want to use an

external mouse, select

Disabled

Fn and Ctrl Key swap

•

Disabled

• Enabled

Enable exchanges of Fn
and Ctrl key action at the
bottom-left of the
keyboard.

Disabled

: Fn key and Ctrl

key behavior is as printed
on the keyboard.

Enabled

: Fn key works as

Ctrl key. Ctrl key works as
Fn key.

P70 User Guide

Summary of Contents for P70

























































































































































































Search results

Summary of Contents for P70

Reviews:

Related manuals for P70

Brands by name

Popular brands

Lenovo P70, User Manual

Search results

Summary of Contents for P70

Reviews:

Related manuals for P70

Brands by name

Popular brands