Hardware Maintenance Manual
38
6. Push a small iron stick (e.g.a paper clip) into the small hole on the
optical drive cover so that the disk springs out as shown.
7. Remove the 2 screws that secure the optical drive to the metal bracket.
8. Use a small flat head screwdriver to press the pins down, then push the
pins out against the cover.
9. Separate the cover from the defective optical drive.
10. Install the new optical drive as follows:
(1) Align the new optical drive with the cover, then push the cover back
into position.
(2) Screw the metal bracket onto the new optical drive.
(3) Slide the new optical drive into the drive bay.
