manualshive.com logo in svg

Lenovo 10K9, Hardware Maintenance Manual, Page: 94 / 158

Share
Download
Lenovo 10K9 Hardware Maintenance Manual Download Page 94

Message/Symptom

FRU/Action

Dead computer. See “Hard disk drive boot error” on page
84.

1. Power Supply

2. System Board

Diskette drive in-use light remains on or does not light
when drive is active.

1. Diskette Drive

2. System Board

3. Diskette Drive Cable

Blank screen except for flashing cursor.

1. System Board

2. Primary Hard Disk Drive

3. Hard Disk Drive Cable

Incorrect memory size during POST

1. Run the Memory tests.

2. Memory Module

3. System Board

"Insert a Diskette" icon appears with a known-good
diagnostics diskette in the first 3.5-inch diskette drive.

1. System Board

2. Diskette Drive Cable

3. Network Adapter

Intensity or color varies from left to right of characters
and color bars

1. Display

2. Video adapter (if present)

3. System Board

No power or fan not running

1. See “Hard disk drive boot error” on page 84.

Non-system disk or disk error-type message with a
known-good diagnostic diskette.

1. Diskette Drive

2. System Board

3. Diskette Drive Cable

Other display symptoms not listed above (including blank
or illegible display)

1. Display

2. System Board

Power-on indicator or hard disk drive in-use light not on,
but computer works correctly

1. Power switch/LED assembly

2. System Board

Printer problems

1. Printer

2. System Board

Program loads from the hard disk with a known-good
diagnostics diskette in the first 3.5-inch diskette drive

1. Run the Setup Utility program and check Startup

sequence.

2. Diskette Drive

3. Diskette Drive Cable

4. System Board

5. Power Supply

RPL computer cannot access programs from its own hard
disk.

1. If network administrator is using LCCM Hybrid RPL,

check startup sequence:

a.

First device - network

b.

Second device - hard disk

2. Hard disk drive

RPL computer does not RPL from server

1. Check startup sequence.

2. Check the network adapter LED status.

86

ThinkCentre M73p Hardware Maintenance Manual

Summary of Contents for 10K9































































































































































Reviews:

No comments