Lenovo 0870A6U, User Manual

Page: 50 / 100

1. Remove all media from the drives and turn off all attached devices and the
computer. Then, disconnect all power cords from electrical outlets and
disconnect all cables that are connected to the computer.
2.
Place a soft, clean towel or cloth on the desk or surface. Hold the sides of your
computer and gently lay it down so that the screen is against the surface and
the cover is facing up.
3. Remove the computer cover. See “Removing the computer cover” on page 16.
4. Locate the ExpressCard in the computer. See “Component locations” on page
12.
5. Carefully remove the four screws
1
that secure the ExpressCard to the system
board and then lift it off the system board.
6. Connect the new ExpressCard to the ExpressCard connector on the system
board. Align the screw holes in the new ExpressCard with the corresponding
holes in the system board and then install the four screws to secure the new
ExpressCard.
What to do next:
v
To work with another piece of hardware, go to the appropriate section.
v
To complete the installation or replacement, go to “Completing the parts
replacement” on page 55.
Figure 30. Removing the ExpressCard
42
User Guide