Lenovo 0870A6U, User Manual

Page: 25 / 100

To remove or reinstall the frame stand, do the following:
1.
Remove all media from the drives and turn off all attached devices and the
computer. Then, disconnect all power cords from electrical outlets and
disconnect all cables that are connected to the computer.
2. Place a soft, clean towel or cloth on the desk or surface. Hold the sides of your
computer and gently lay it down so that the screen is against the surface and
the cover is facing up.
3. Remove the four screws that secure the frame stand. Keep the four screws, and
put them aside. You will need them when installing the frame stand.
4. Lift the frame stand off the computer and put it in a safe place.
5.
To reinstall the frame stand, position the frame stand so that the four screw
holes align with those in the computer wall mount and then install the four
screws to secure the frame stand.
What to do next:
v To work with another piece of hardware, go to the appropriate section.
v
To complete the installation or replacement, go to “Completing the parts
replacement” on page 55.
Removing or reinstalling the lift stand
Your computer might come with a lift stand or a frame stand. This section
provides instructions on how to remove or reinstall the lift stand. For information
about the frame stand, see “Removing or reinstalling the frame stand” on page 16.
Figure 6. Removing the frame stand
Chapter 2. Installing or replacing hardware
17