Lenovo 0870A6U, User Manual

Page: 29 / 100

2. Place a soft, clean towel or cloth on the desk or surface. Hold the sides of your
computer and gently lay it down so that the screen is against the surface and
the cover is facing up.
3.
Remove the computer cover. See “Removing the computer cover” on page 16.
4. Remove the rear I/O assembly cover from the rear I/O assembly. See
“Removing or reinstalling the rear I/O assembly cover” on page 20.
5. Remove the frame stand or lift stand. See “Removing or reinstalling the frame
stand” on page 16 or “Removing or reinstalling the lift stand” on page 17.
6. Remove the screw that secures the wall mount cover, slide the wall mount
cover to the bottom of the computer, and then lift it up to remove it from the
wall mount.
7. To reinstall the wall mount cover, align the screw hole in the wall mount cover
with the corresponding hole in the wall mount and then install the screw to
secure the wall mount cover.
What to do next:
v
To work with another piece of hardware, go to the appropriate section.
v
To complete the installation or replacement, go to “Completing the parts
replacement” on page 55.
Removing or reinstalling the wall mount
To remove or reinstall the wall mount, do the following:
1. Remove all media from the drives and turn off all attached devices and the
computer. Then, disconnect all power cords from electrical outlets and
disconnect all cables that are connected to the computer.
Figure 10. Removing the wall mount cover
Chapter 2. Installing or replacing hardware
21