www.lennoxhearthproducts.com
126544-01A
28
Figure 60- Day Programming Menu
OPERATION
Continued
Title:
Daily Program.
A:
Selected (including ''Daily'').
The select-
ed day can be changed by pressing ''Change''
(middle button).
B:
Day Schedule Graphic.
This bar displays
the program for the whole day by showing
the temperature setting for each hour of the
day. To access the day schedule graphic,
press ( ) (left button). To change the desired
temperature, go to the hour you want to
change by pressing (left button) and then
press change (middle button). There are 3
temperature settings:
Off:
No temperature control (the appliance
is in pilot mode).
'Night Temp:
The night temperature is set
as desired temperature and the appliance will
heat until this temperature is reached.
'Comfort Temp:
The comfort temperature
is set as the desired temperature and the
appliance will heat until this temperature is
reached.
Finally, to launch the program mode, in the
main menu, set Program to ''On'', and select
the desired Program Type (Daily or Weekly)
as shown in Figure 60.
OTHER FEATURES
How to lock and unlock the remote (child
lock)
To unlock the remote, press the ''Unlock''
button and ''OK''.
To lock the remote, in the main screen press
''Menu'' go to the Lock option, press ''Select''
and then ''Change''. The remote will immedi
-
ately go into locked mode.
ON
OFF
LED Display
ON/OFF Button
UP Button
DOWN Button
Figure 61 - Touch Pad Control
Automatic lock can be selected. This means
that if no button is pressed for while, the
remote automatically goes into locked mode.
How to select the temperature unit (ºC/ºF)
In the main screen, press ''Menu'' button. Se
-
lect ''Adjust Menu'' and then select ''Unit''. To
change the temperature unit press ''Change''
button.
TOUCH PAD OPERATION
This touch control has only 3 buttons for con-
trolling manually the flame of the appliance
(see Figure 61).
The touch pad has:
1. Led display
2. ON/OFF button
3. UP button
4. DOWN button
With this control it is possible to turn on the
fire, turn off the fire and control the flame level.
Note:
The touch pad includes a red LED
display light. If the LED remains on, the black
plug is connected upside down. Unplug, turn
over, and reconnect.
SWITCHING ON
To turn the system on just press the ON/OFF
button. The system will emit a beep and begin
the ignition process, which can take about
20 seconds. Once the start up process is
complete, the pilot flame is lit.
f i r e - p a r t s . c o m
