www.lennoxhearthproducts.com
126544-01A
18
After 40 seconds, the configuration menu
appears (see Figure 29). With ''Pairing'' high
-
lighted press the middle ''select'' button. ''Off''
becomes highlighted (see Figures 29 and 30).
IMPORTANT! Be prepared to press the S1
button as noted in the beginning of this sec-
tion. After the next step, you have only 20
seconds to push (press and release) the S1
button (yellow/orange) in the control module
(see Figure 24, page 17).
Figure 28 - Main Screen
Figure 29 - Configuration Menu
Figure 30 - Off Highlighted
Configuration
Select Back
Off
No
Yes
0.5°C
Thermostat
Programming
Gap Temp
Fri 22:04
Pairing
Configuration
Change
Back
Yes
Yes
0.5°C
Thermostat
Programming
Gap Temp
Fri 21:47
Off
Pairing
OFF
Button
Fri 20:45
Lock
Menu
On
OFF
°F
75
u
Configuration
Select Back
Off
No
Yes
0.5°C
Thermostat
Programming
Gap Temp
Fri 22:04
Pairing
SELECT
Button
Configuration
Select Back
Off
No
Yes
0.5°C
Thermostat
Programming
Gap Temp
Fri 22:04
Pairing
Configuration
Change
Back
Yes
Yes
0.5°C
Thermostat
Programming
Gap Temp
Fri 21:47
Off
Pairing
NOTE:
The control module may be turned dif-
ferently than shown in this figure. Look for the
matching text on the control module to help
locate the small yellow / orange S1.
Press the left "Change" button and "Off" becomes
"On" (see Figure 31, above). Press the S1 but
-
ton to re-pair the remote to the control module.
Once this operation is done, you will hear one
beep in the control module and the configura
-
tion menu will show signal bars:
(see
Figure 32, page 19). If you do not hear the beep
and then see signal bars within 30 seconds of
hearing the beep, then the repairing process
was not completed successfully. If this occurs,
remove the batteries from the remote control,
wait 3 minutes, and restart the re-pairing pro
-
cess. If you see signal bars, then the remote
control has paired properly. Go to the next step.
INSTALLATION
Continued
Configuration
Change
Back
Yes
No
0.5°C
Thermostat
Programming
Gap Temp
Fri 22:05
Off
Pairing
Configuration
Select Back
Off
No
Yes
0.5°C
Thermostat
Programming
Gap Temp
Fri 22:05
Pairing
Figure 31 - Change OFF to ON
Figure 32 - Signal Bars
Configuration
Change
Back
Yes
No
0.5°C
Thermostat
Programming
Gap Temp
Fri 22:04
On
Pairing
Change
Button
f i r e - p a r t s . c o m
