www.lennoxhearthproducts.com
126544-01A
22
INSTALLATION
Continued
Figure 47 - Placement of Rock Wool (shown with Platinum Bright Embers)
Figure 46 - Platinum Bright Embers
Flat Front Burner
Ember Material
Rock Wool
Figure 45 - Ember Chunk Placement SVFS36 Series
Ember Chunk #1
Ember Chunk #2
Ember Chunk #3
Flat Front Burner
1.
Ember Chunk Placement.
The SVFS36
series burner systems include three
ember chunks that are designed to fit
over shoulder screws on the ember pan
burner. The bottom of each ember chunk
has a hole for securing the ember chunk
in place when it is placed over a shoulder
screw. Place the ember chunks as shown
in Figure 45 by placing the ember chunk
with the number "1" on the left, "2" in the
center, and "3" on the right. These num
-
bers are embossed on the back of each
piece for identification purposes. Please
note that SVFS32 series burner systems
do not
include ember chunks.
2. Two ember materials are supplied with
this log set. Platinum Bright Embers give
a bright glow appearing as hot coals.
Should embers need replacing, see
Parts
, page 40.
Platinum Bright Ember placement.
Add
embers to front, flat burner. Gently remove
embers from bag. Separate pieces of
ember material and place on surface of
flat burner just behind horizontal ports as
shown in Figure 46.
Rock Wool placement.
Place rock wool
material on front flat burner in areas away
from ports as shown in Figure 47.
3.
DO NOT place rock or additional logs
on front burner or on logs.
Placing any
material on unit other than ember material
on front burner may result in production
of carbon monoxide or soot.
f i r e - p a r t s . c o m
