LELY Hibiscus 915 CD Vario, Operator'S Manual

Page: 53 / 64

5.3.2 Replace the tine arm
Procedure
1. Remove the tine arm with tines that is broken of damaged from the
tine arm support.
Proceed with the following steps if the tine arm support is also
damaged:
a. Remove the cover plate from the rotor assembly.
b. Remove the tine arm support by releasing the three bolts,
washers and nuts.
c. Install the the new tine arm support into the cam track (I or II),
the position of the tine arm assembly depends on the rotation
direction of the rotor.
d. Install the cover plate on the rotor.
e. Grease the cam track (page 5
‑
13).
f. Goto step 2.
2. Install the new tine arm with tines on the tine arm support.
1. Tine arm support (Incl. cover plate with lubrication pivot) - 2. Bolt - 3. Washer -
4. Nut - 5. Tine arm support - 6. Cover plate - 7. Screw - 8. Tine arm - 9. Cam track
Figure 32. Replace tine arm/tine arm support
Maintenance 5-15
R-H015-1210EN