WELGER • V 160
7
2 Safety
2.1
General safety instructions
Attention!
Even if all instructions are observed the machine involves
residual dangers. Always handle the machine with care to avoid
danger to yourself and others!
•
Before starting work perform a visual inspection of the
machine. Check whether any device has been changed or is
missing and pay attention to any unusual noise or leaks
which occur during operation.
•
All protective devices, as for example casing sheets, rubber
skirts or distance brackets are for your safety! Never operate
the machine with defective or removed protective devices e.
•
Keep all safety relevant parts always in correct function.
Before commissioning all guard casings must be mounted
and closed!
•
Never perform maintenance- and repair works during
machine is in operation.
•
In case of all work on movable parts or in the range of action
of movable parts: Switch off power take-off shaft, switch off
tractor engine, remove ignition key and disconnect drive
shaft from power take-off shaft end. Interrupt electrical
connection between tractor and machine.
•
Bring no metal parts close to the machine, as long the
electric control is in operation (e.g. tools, safety boots with
metal caps). Reason: unintentional triggering of proximity
switches and thus unexpected machine moves.
•
When carrying out work on the opened tail gate: use tail gate
locking device (chapter „2.4 Tail gate locking device“).
•
When carrying out work in the vicinity of the net knife: use
net knife safeguard (chapter "2.7 Net knife safeguard").
•
Never remove any crop material from the machine while the
drive is running, or while the disconnected machine is still
moving. Always switch-off power take-off shaft and tractor
engine first.
•
During work only the driver must be on the tractor. Riding on
the machine is prohibited!
•
Never step on the maintenance platforms during machine is
in motion. Before stepping on the maintenance platforms:
stop machine, switch-off power take-off shaft and tractor
motor, take out ignition key and wait for standstill of the
machine.
Summary of Contents for V 160
