LELY WELGER V 160, Operating Manual, Page: 56 / 80

48 WELGER • V 160
7.6 Windguard / Pick-up shield*
At all versions of the pick-up (Figure 50 and Figure 51) the
windguard is mounted movable – hanging above the pick-up.
(Figure 49) Adjust the height of the windguard rake to the
swath thickness using the chain.
(Figure 49) To avoid that the pick-up grasps the chain the
upper end of the chain must always be fastened to the hook.
Caution!
On the pick-up with pick-up width 2 m both pick-up guide
wheels cover the circular path of the tines laterally and are
therefore part of the safety equipment.
That is why both guide wheels must always be attached when
the machine is used.
7.7 PTO speed
Operate machine at power take-off shaft nominal speed of
540 rpm.
Caution!
Only the drive shafts prescribed by the manufacturer may be
used! Protective tube and guard cone of the drive shaft, and the
power take-off shaft protection, must be fitted and be in proper
condition.
Always ensure that the drive shaft is installed and secured
correctly: Secure the drive shaft safeguard against revolving by
fitting the chain. Ensure before switching on the power take-off
shaft that nobody is within the range of danger of the device!
Figure 49
Figure 50 Figure 51