LELY WELGER V 160, Operating Manual, Page: 67 / 80

WELGER • V 160 59
10.2 Tensioners
Caution!
(Figure 66) The gears [2] of the main drive shaft [1] are
mounted with tensioners to the shaft end. Working at the
tensioners [3] must only performed by instructed technical staff.
10.3 Maintenance of the net tying unit
10.3.1 Adjusting the disk brake of the net tying unit
(Figure 67 and Figure 68) To prevent coasting of the net roll
the disk brake must be adjusted in such a way that the brake
disk can no more be turned by hand when the lever [1]
points upwards.
Slacken screw [2] on the lever [1], tighten milled nut [3] so
far that the brake linings are fully attached to the brake disk.
Retighten screw [2].
When brake lining [4] is worn only one-sided slacken lock
nut [5] and slightly insert screw [6] until brake linings are
parallel again, lock screw [6] again.
Figure 66
Figure 67
Figure 68