63
If you wish to have an overview of relevant information, e.g. ambient temperature, capacity
utilization of the heating, etc., select the Settings menu and confirm your selection with
key (33).
Now activate the Application Mode.
All available information (Symbol i) is now displayed in the Work display (see Display sym-
bols of the work display).
If you have activated the Show Set Values function, then the actual temperature (large) and
the setpoint temperature (small) will be presented in the
Work display (41)
.
This applies analogously for drive (m/min) or air volume (percent).
Use the
Up/Down arrow keys (30)
to select the air temperature setpoint and keep the
Confirm button (33)
pressed down afterwards until the current value is output in the
Status display (40)
.
Use the
Up/Down arrow keys (30)
to select the drive setpoint and keep the
Confirm
button (33)
pressed down afterwards until the current value is output in the
Status dis-
play (40)
.
The key lock is activated or deactivated by simultaneously pressing the
Up/Down arrow keys (30)
for at least two
seconds.
°
C
250
230
9.5 Show current values (Application Mode)
9.6 Show Set Values
9.7 Show current voltage
9.8 Show distances covered
9.9 Key block
