58
40
41
42
The display is subdivided into three display areas:
40.
Status display (areas 1/left + 2/right)
41.
Working display
42.
Menu selection
The
Status display
is subdivided into a
left-hand (1)
and a
right-hand area (2)
.
Profile name
• Displays the name of the selected currently valid welding profile (e.g. Basic).
• If a profile name contains more than 6 characters, the first 6 characters are shown first, one after the other,
followed by the remaining 6 characters. The system presents the first 6 characters afterwards.
Voltage
• If there is overvoltage or undervoltage in an electrical current network, the voltage will be displayed.
General Warning note
(see also Warning notes / Symbols for warning and error messages)
Key block is activated.
Heating is switched on.
Note regarding undervoltage in the electrical current network.
Note regarding overvoltage in the electrical current network.
8.2 Display
8.3 Display symbols of the status display (Display 40)
Status display 1 / Left
Status display 2 / Right
