80
TS11/TS15, Check & Adjust
centre of the prism, to speed up the ATR measurement. These small deviations/ATR
offsets, are calculated individually for each measurement and corrected electroni-
cally. This means that the horizontal and vertical angles are corrected twice: first by
the determined ATR errors for Hz and V, and then by the individual small deviations
of the current aiming.
Next step
IF the task is to
THEN
adjust a combination of
instrument errors
Refer to "4.3 Combined Adjustment (l, t, i, c and ATR)".
adjust the tilting axis
Refer to "4.4 Tilting Axis Adjustment (a)".
adjust the circular level
Refer to "4.5 Adjusting the Circular Level of the Instru-
ment and Tribrach".
adjust the laser/optical
plummet
Refer to "4.7 Inspecting the Laser Plummet of the
Instrument".
adjust the tripod
