Leica TS11 User Manual Download Page 66

Page: 66 / 220

TS11/TS15, Operation

Description of the LEDs (GS12)

IF the

THEN

BT LED

green

Bluetooth is in data mode and ready for
connecting.

purple

Bluetooth is connecting.

blue

Bluetooth has connected.

flashing blue

data is being transferred.

PWR LED

off

power is off.

green

power is okay.

flashing green

power is low. The remaining time for which
enough power is available depends on the type
of survey, the temperature and the age of the
battery.

red

power is very low. The battery should be
changed.

TRK LED

off

no satellites are tracked.

flashing green

less than four satellites are tracked, a position is
not yet available.

Summary of Contents for TS11





























































































































































































































Search results

Summary of Contents for TS11

Reviews:

Related manuals for TS11

Brands by name

Popular brands

Leica TS11, User Manual

Search results

Summary of Contents for TS11

Reviews:

Related manuals for TS11

Brands by name

Popular brands