TS11/TS15, Check & Adjust
77
Select
Main Menu
:
Instrument
\
TPS settings
\
Level bubble & compensator
to check
whether the tilt correction and the horizontal correction are turned on.
View current
adjustment errors
To view the adjustment errors currently used, select
Main Menu
:
User
\
Check &
Adjust
to open the
Check & Adjust Wizard
. Select the option
View the current
values
.
Mechanical adjust-
ment
The following instrument parts can be adjusted mechanically:
•
Circular level on instrument and tribrach
•
Laser plummet
•
Optical plummet - option on tribrach
•
Allen screws on tripod
Precise measure-
ments
To get precise measurements in the daily work, it is important:
•
To check and adjust the instrument from time to time.
•
To take high precision measurements during the check and adjust procedures.
•
To measure targets in two faces. Some of the instrument errors are eliminated
by averaging the angles from both faces.
•
Refer to "4.2 Preparation" to find more important points.
)
During the manufacturing process, the instrument errors are carefully determined
and set to zero. As mentioned above, these errors can change and it is highly recom-
mended to redetermine them in the following situations:
