manualshive.com logo in svg

Leica TC2003, Manual

Share
Download
Leica TC2003 Manual Download Page 117

CO

IN

ID

PM

FS

SC

OC

IO

AR

RC

EG

CA

CT

BC

DF

SD

TS

IX

© Leica

TPS-System 1000-2.3.1en

117

Chooses the standard recording template for storing
coordinates.

Chooses the standard recording template for storing
direction, distance and ppm.

Opens the list of choices of display data, for changing
the display template. For details, see "Types of field".

In contrast to the display template, the parameters in the
recording template can be set only once.

11

Point number

81

Easting

82

Northing

83

Elevation

11

Point number

21

Hz

22

V

31

Slope distance

51

ppm/mm

If information needs to be stored as remarks, it must be
defined in the recording template. If the remarks are
also defined in the display template, the information
can be altered directly in the measuring dialog.
Otherwise remarks can be entered in the "TARGT"
option in the measurement data display.

The standard REC templates are different from the
standard display template. The REC template does not
include the reflector height, for example. If the heights
of targets are to be inspected in the office, the word
"Refl. Height" must be added to the recording
template.

Summary of Contents for TC2003



































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands