Leica mojo 3D User Manual Download Page 96

Page: 96 / 378

Leica mojo3D, Setting Guidance Types

7. Tap the

button.



If there are waylines with the same name already on the
mojo3D, the Renaming required screen appears to allow the
conflicting waylines to be renamed.

• To have the mojo3D automatically create new names, select

Automatic. The mojo3D adds a number to the imported
waylines’ names so you can identify the imported waylines.

OR
• To manually rename the imported waylines, select Manual.

The Import Summary screen appears indicating the progress and
success of the import.

8. To return to the wayline management screen, tap the

button.

The newly imported waylines now appear in the wayline manage-
ment screen and are available for loading.

9. To return to the main navigation screen, tap the

button.

Summary of Contents for mojo 3D



























































































































































































































































































































































































Search results

Summary of Contents for mojo 3D

Reviews:

Related manuals for mojo 3D

Brands by name

Popular brands

Leica mojo 3D, User Manual

Search results

Summary of Contents for mojo 3D

Reviews:

Related manuals for mojo 3D

Brands by name

Popular brands