manualshive.com logo in svg

Leica mojo 3D, User Manual

Share
Download
Leica mojo 3D User Manual Download Page 250

250

Leica mojo3D, Safety Directions

•

Use with accessories from other manufacturers without the prior explicit 
approval of Leica Geosystems.

•

Inadequate safeguards at the working site, for example when using on the 
intended site.

Warning

Adverse use can lead to injury, malfunction and damage.
It is the task of the person responsible for the equipment to inform the user about 
hazards and how to counteract them. The product is not to be operated until the user 
has been instructed on how to work with it.

Warning

Unauthorised modification of agricultural machinery by mounting or installing the 
product may alter the function and safety of that agricultural machinery.

Precautions:

Follow the instructions of the machinery manufacturer. If no appropriate instruction 
is available, ask the machinery manufacturer for instructions before mounting or 
installing the product.

Summary of Contents for mojo 3D



























































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands