Page 17 Operating Manual Leica EM TXP 10/10
Press button to toggle
between:
AUTO pump starts when the
motor is switched on.
CONT pump is continuously
running (spout setting)
OFF (e.g. if extraction unit is
connected)
Select step size of the spindle advance.
Press button to toggle between four
different step sizes.
Light control
Active if lever for auto E-W move
(7.1) is pulled out.
Spindle moves to the right (west) and
to the left (east) side by pressing the
corresponding button.
ment
Retract spindle to the HOME position of
the 12mm travel range. Movement stops
when button is pressed again.
Spindle moves towards the sample as
long this button is pressed.
Button to switch the spindle motor on and
off. One cycle will be performed if the
lever for auto E-W movement is pulled
out. Press button longer than one second
to start continuous motor driven E-W
movement.
Button to set the cutting (polishing) window.
