Page 9 Operating Manual Leica EM TXP 10/10
4.2.3 If the instrument is equipped with M80 and moveable objective adaptor:
Insert stereo microscope in the carrier of the instrument and clamp it with the knurled
screw (1.1) Slide the movable lens adaptor (1.2) onto the M80 carrier to the end stop.
Clamp the movable adaptor (1.2) with the two hexagonal screws. Locate the vertical
set screw (1.3) in the same vertical orientation as the clamping screw (1.1) of the
stereo.
Screw the objective lens into the movable lens adaptor.
Slide the top light ring illuminator onto the objective mounting of the stereo
microscope. Clamp the illuminator with attached screw.
Place the ergo-wedge and the binocular tube onto the M80 carrier.
The movable objective adaptor is equipped with two set screws allowing a shift of the
objective lens +/- 5mm. Both set screws are provided with an indicator mark for the
centre position of the lens. See chapter 8.2.2. for further information.
Please see information about operation of stereo microscope in the manual
enclosed in the packaging of the microscope.
4.2.4 Eyepieces
Insert the eyepieces into the binocular tubes of the stereo microscope. Make sure the
eyepiece with the reticule is inserted in the side of your dominant eye.
1.3
1.1
1.2
