Janu
ary 201
9
Legrand PDU User Guide 307
Actuator Information
This command syntax shows an actuator's information.
#
show actuators <n>
To show detailed information, add the parameter "details" to the end of the command.
#
show actuators <n>
details
Variables:
<n> is one of the options:
all
, or a number.
Option
Description
all
Displays the information for all actuators.
Tip: You can also type the command without
adding this option "all" to get the same data.
A specific
actuator
number*
Displays the information for the specified actuator
only.
* The actuator number is the ID number assigned to the actuator. The ID number can be found using the
Legrand PDU web interface or CLI. It is an integer starting at 1.
Displayed information:
Without the parameter "details," only the actuator ID, type and state are displayed.
With the parameter "details," more information is displayed in addition to the ID number and actuator
state, such as the serial number and X, Y, and Z coordinates.
Inlet Sensor Threshold Information
This command syntax shows the specified inlet sensor's threshold-related information.
#
show sensor inlet <n> <sensor type>
To show detailed information, add the parameter "details" to the end of the command.
#
show sensor inlet <n> <sensor type>
details
Variables:
<n> is the number of the inlet whose sensors you want to query. For a single-inlet PDU, <n> is always 1.
<sensor type> is one of the following sensor types:
Sensor type
Description
current Current
sensor
voltage Voltage
sensor
activePower Active
power
sensor
apparentPower
Apparent power sensor
powerFactor
Power factor sensor