Janu
ary 201
9
220 Legrand PDU User Guide
To use a different SMTP server, select the "Use custom SMTP Server" checkbox. The fields for
customized SMTP settings appear. For information on each field, see
Configuring SMTP Settings
(on
5. Select the webcam that is capturing the images you want sent in the email.
6. Adjust the values of the following:
Number of Snapshots - the number of snapshots to be taken when the event occurs. For example,
you can specify 10 images be taken once the event triggers the action.
Snapshots per Mail - the number of snapshots to be sent at one time in the email.
Time Before First Snapshot - the amount of time in seconds between when the event is triggered and
the webcam begins taking snapshots.
Time Between Snapshots - the amount of time in seconds between when each snapshot is taken.
Send an SNMP Notification
This option sends an SNMP notification to one or multiple SNMP destinations.
Operation:
1. Choose Device Settings > Event Rules >
.
2. Select "Send SNMP notification" from the Action list.
3. Select the type of SNMP notification. See either procedure below according to your selection.
To send SNMP v2c notifications:
1. In the Notification Type field, select SNMPv2c Trap or SNMPv2c Inform.
2. For SNMP INFORM communications, leave the resend settings at their default or do the following:
a. In the Timeout field, specify the interval of time, in seconds, after which a new inform communication
is resent if the first is not received. For example, resend a new inform communication once every 3
seconds.
b. In the Number of Retries field, specify the number of times you want to resend the inform
communication if it fails. For example, inform communications are resent up to 5 times when the
initial communication fails.
3. In the Host fields, enter the IP address of the device(s) you want to access. This is the address to which
notifications are sent by the SNMP system agent.
4. In the Port fields, enter the port number used to access the device(s).
5. In the Community fields, enter the SNMP community string to access the device(s). The community is
the group representing the Legrand PDU and all SNMP management stations.
Tip: An SNMP v2c notification action permits only a maximum of three SNMP destinations. To assign more
than three SNMP destinations to a specific rule, first create several SNMP v2c notification actions, each of
which contains completely different SNMP destinations, and then add all of these SNMP v2c notification
actions to the same rule.
To send SNMP v3 notifications:
1. In the Notification Type field, select SNMPv3 Trap or SNMPv3 Inform.
2. For SNMP TRAPs, the engine ID is prepopulated.
3. For SNMP INFORM communications, leave the resend settings at their default or do the following:
a. In the Timeout field, specify the interval of time, in seconds, after which a new inform communication
is resent if the first is not received. For example, resend a new inform communication once every 3
seconds.
b. In the Number of Retries field, specify the number of times you want to resend the inform
communication if it fails. For example, inform communications are resent up to 5 times when the
initial communication fails.
4. For both SNMP TRAPS and INFORMS, enter the following as needed and then click OK to apply the
settings:
