Janu
ary 201
9
224 Legrand PDU User Guide
Scheduling an Action
An action can be regularly performed at a preset time interval instead of being triggered by a specific event.
For example, you can make the Legrand PDU report the reading or state of a specific sensor regularly by
scheduling the "Send Sensor Report" action.
When scheduling an action, make sure you have a minimum of 1-minute buffer between this action's
creation and first execution time. Otherwise, the scheduled action will NOT be performed at the specified
time when the buffer time is too short. For example, if you want an action to be performed at 11:00 am, you
should finish scheduling it at 10:59 am or earlier.
If the needed action is not available yet, create it first. See
Available Actions
(on page 211).
Operation:
1. Choose Device Settings > Event Rules >
.
2. To select any action(s), select them one by one from the Available Actions list.
To select all available actions, click Select All.
3. To remove any action(s) from the Selected Actions field, click that action's
.
To remove all actions, click Deselect All.
4. Select the desired frequency in the Execution Time field, and then specify the time interval or a specific
date and time in the field(s) that appear.