6/29
Technical data sheet: S000114123EN-1
Updated:
Created: 18/01/2021
Cat. No(s): 0 026 72/73/74/76/78/79
KNX controller multi-application DIN
5 . OPERATION
5 .1 Description of the device
0 026 74
Channel
selection
buttons
ON/OFF
UP/DOWN
OPEN/CLOSE
Buttons
Inputs
Outputs
Manual
control
button
KNX
programming
LED
KNX
programming
button
KNX
connection
Physical address label
Indicator
LEDs
Outputs contain 5 independent outputs (AB, CD, EF, GH, IJ)
A1 A2 B1 B2
I1 I2 J1 J2
E1 E2
F1 F2
C1 C2 D1 D2
G1 G2 H1 H2
5 .2 Commissioning
Physical addressing and programming can be done ETS4 or higher...
Important:
A detailed information about parameter configuration can be found
in Product Manual of device.
Installation and commissioning of device may only be implemented by
trained electricians. The relevant standards, directives, regulations and
instructions must be observed when planning and implementing the
electrical installation.
• When connecting the device make sure that the device can be
isolated!
• Protect the device against moisture, dirt and damage during transport,
storage and operation!
• Do not operate the device out of the specified technical data which is
stated.
• The device may only be operated in closed enclosures such as
distribution boards.
6 . STANDARDS
• Type of protection: EN 60 529
• Safety class II: EN 61 140
• Installation: EN 60 715
CONTENTS
