LOG LAYOUT INSTRUCTIONS
20
1. Place the rear coal on the rear coal retainer ledge in
a central position (Fig. 37).
2. Place the main fuel bed on to the middle section of
the metal burner tray. It is important that the front edge
of the fuel bed is located behind the burner strip
(Fig. 38).
3. Position the front coal on the front coal retainer,
making sure that the back edge is pushed up against
the front of the burner strip (Fig. 39.
4. Place the side cheeks into position, making sure
they are positioned either side of the fuel bed and the
overhang is at the front. The outside edge should be in
contact with the radiant box ceramic liner. Ensure that
the lower part of the side cheeks sit on the front coal
and are in front of the rear coal (Fig. 40).
It very is important that all the logs are used and
arranged as shown in order to achieve the desired
flame picture.
It may be necessary to remove some or all of the logs
to clean them at some time. Cleaning must only be
done using a soft brush.
CAUTION: The logs are extremely fragile and must
be handled accordingly. Gloves should be worn and
any inhalation of dust should be avoided. The logs
must be kept away from children at all times. Never
put additional logs on the fire. Never use logs other
than those originally supplied, or genuine Legend
Spare Parts.
Fig. 36
Fig. 40
Fig. 37
Fig. 38
Fig. 39
Burner Tray
Burner Strip
Rear Coal
Right Hand
Side Cheek
Left Hand
Side Cheek
Fuel Bed
Front Coal
