PEBBLE LAYOUT INSTRUCTIONS
18
1. Place the rear coal on the rear coal retainer ledge in
a central position (Fig. 28).
2. Place the main fuel bed on to the middle section of
the metal burner tray. It is important that the front edge
of the fuel bed is located behind the burner strip
(Fig. 29).
3. Position the front coal on the front coal retainer,
making sure that the back edge is pushed up against
the front of the burner strip (Fig. 30).
4. Place the side cheeks into position, making sure
they are positioned either side of the fuel bed and
the overhang is at the front. The outside edge should
be in contact with the radiant box ceramic liner.
Ensure that the lower part of the side cheeks sit on
the front coal and are in front of the rear coal
(Fig. 31).
It is very important that all the pebbles are used
and arranged as shown in order to achieve the
desired flame picture.
It may be necessary to remove some or all of the
pebbles to clean them at some time. Cleaning must
only be done using a soft brush.
CAUTION: The pebbles are extremely fragile and
must be handled accordingly. Gloves should be
worn and any inhalation of dust should be avoided.
The pebbles must be kept away from children at all
times. Never put additional pebbles on the fire.
Never use pebbles other than those originally
supplied, or genuine Legend Spare Parts.
Fig. 27
Fig. 31
Fig. 28
Fig. 29
Fig. 30
Burner Tray
Burner Strip
Rear Coal
Right Hand
Side Cheek
Left Hand
Side Cheek
Fuel Bed
Front Coal
