0
- Smart Plug memorizes its state after a power failure.
1
- Smart Plug does not memorize its state after a power failure.
Connected device will be on after the power supply isreconnected.
2
- Smart Plug does not memorize its state after a power failure.
Connected device will be off after the power supply isreconnected.
Default setting:
0
Parameter size:
1 [byte]
Parameter No. 03 Notification when Load status change
Smart Plug can send notifications to associated device (Group Lifeline) when the status of
smart plug’s load is changed.
0
- The function is disabled.
1
- Send Basic report.
2
- Send Basic report only when Load status is not changed by Z-WAVE Command.
Default setting:
1
Parameter size:
1 [byte]
Parameter No. 04 LED Load indicator mode selection
