Configure LED Display mode to prevent light pollution at night.
0
-The LED status follows the load change.
1
–when operating the load, The LED lights for 5 seconds and then turns off.
Default setting:
0
Parameter size:
1 [byte]
Parameter No. 16 The value here represents minimum change in wattage (in terms of
wattage) for a meter report to be sent
When the change value of load power exceeds the setting value, smart plug will send meter
report (watt)to associated device (Group Lifeline).
Available settings:
0 - 65535
(0 - 65535W)
0
- The function is disabled.
Default setting:
50
(50W)
Parameter size:
2 [byte]
Parameter No.17 The value here represents minimum change in wattage percent (in
terms
of percentage) for a meter report (watt) to be sent