2 seconds and Then will be in power indication mode,
Otherwise, The LED will keep slow flash.
Smart Plug is in the Z-Wave network:
Trigger
Description
Short press once 1.
Changing the status of Smart Plug’s load.
2.
LED will be in power indication mode.
Short press twice
1. Smart Plug will send node info frame.
2.
Remove for exclusion:
1.
Set the Z-Wave network main controller into
removing mode.
2.
Short press Z-button twice.
3.
The LED keep blink to the end of remove exclusion, If
the remove for exclusion is successful, The LED will
keep slow flash, Otherwise, LED will be in power
indication mode.
Short press triple
1. Smart Plug will send node info frame.
2.
Remove for exclusion:
1.
Set the Z-Wave network main controller into