Meter Type
01
Meter Reset
TRUE
Scale Supported
35 (Power，Current，voltage，energy)
5.6 Basic Command
BasicCC maps to SWITCH_BINARY Command
5.7 Configuration Command
Smart Plug offers a wide variety of advanced configurationsettings. Below parameters can
be accessed from main controllersconfiguration interface.
Parameter No. 01 Overcurrent protection
Smart Plug keep detecting the load power, once the ACcurrent exceeds 16A for more than
5s, smart plug's relay will turn off.
0
- The function is disabled
1
- The function is enabled.
Default setting:
1
Parameter size:
1 [byte]
Parameter No. 02 Setting device status after power failure
Define how the Plug reacts after the power supply is back on.
