manualshive.com logo in svg

LeCroy USB Protocol Suite Advisor T3, User Manual

Share
Download
LeCroy USB Protocol Suite Advisor T3 User Manual Download Page 95

USB Protocol Suite

 

User Manual

Chapter 4: Software Overview

LeCroy Corporation

 81

4.3.6 Generator (Traffic Generation for USB 3)

(See “Traffic Generation (3.0 Exerciser)” on page 307)

4.3.7 Generator (Traffic Generation for USB 2)

(See “Traffic Generation (2.0)” on page 277)

4.3.8 View Level

(See “Switch to Transactions View” on page 108 and following)

Go to 
USB 3.0              
Exerciser
window.

Manual Trigger

Display 
Export to 
Script dialog.

Repeat Upload

Start or Stop Traffic Generation 
(available if you have the 
Traffic Generation module).

Bitstream and Intelliframe modes

Repeat Mode. This button becomes active 
when a traffic generation file (*.utg) is 
open.

Display Packets
See “Trace View Features” on page 
93.

Display Device Wire Adapter 
Segments
See “Switch to Device Wire Adapter 
Segment View” on page 116.

Display Transactions
See “Switch to Transactions View” 
on page 108.

Display Device Wire Adapter 
Transfers
See “Switch to Device Wire Adapter 
Transfer View” on page 116.

Display Split Transactions
See “Switch to Split Transaction 
View” on page 112.

Display PTP Transactions
See “Switch to PTP Transactions” on 
page 117.

Display Transfers
See “Switch to Transfer View” on 
page 112.

Display PTP Objects
See “Switch to PTP Object 
Transfers” on page 117.

Display Host Wire Adapter 
Segments
See “Switch to Host Wire Adapter 
Segment View” on page 115.

Display PTP Sessions
See “Switch to PTP Sessions” on 
page 118.

Display Host Wire Adapter Transfers
See “Switch to Host Wire Adapter 
Transfer View” on page 116.

Display SCSI Operations

WA Group
Click the arrow to display the 
Wire Adapter Levels.

PTP Group
Click the arrow to display the 
PTP Levels

Summary of Contents for USB Protocol Suite Advisor T3





































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands