manualshive.com logo in svg

LeCroy USB Protocol Suite Advisor T3, User Manual

Share
Download
LeCroy USB Protocol Suite Advisor T3 User Manual Download Page 208

Chapter 9: Reports

USB Protocol Suite User Manual

194

LeCroy Corporation

9.7.1 Using the Link Tracker Window

The Link Tracker window can be reformatted in several ways.

Zooming In and Out

Zooming out can give you a quick, high-level view of a trace. A fully zoomed out trace 
only shows columns and colored lines. Using the colors, you can see what types of traffic 
run through the trace. 

Further information can be obtained on any point of interest in the trace by positioning 
your mouse pointer over it. Tool tips provide detailed description of events. 

Note

: When fully zoomed out, the smallest graphical unit is the DWORD, represented by 

a single line. Zooming out makes the trace appear smaller and increases the time scale 
in the first column.

Summary of Contents for USB Protocol Suite Advisor T3





































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands