manualshive.com logo in svg

LeCroy USB Protocol Suite Advisor T3, User Manual

Share
Download
LeCroy USB Protocol Suite Advisor T3 User Manual Download Page 291

USB Protocol Suite

 

User Manual

Chapter 11: Traffic Generation (2.0)

LeCroy Corporation

 277

Chapter 11:  Traffic Generation (2.0)

USB 2.0 Traffic Generation allows you to generate USB 2.0 traffic and test designs under 
realistic conditions. Traffic Generation can also transmit known bad packets, providing an 
opportunity for engineers to observe how a device handles specific adverse conditions.

Note: 

For traffic generation for USB 3.0, see “Traffic Generation (3.0 Exerciser)” on page 

307.

11.1 Connecting to the Exerciser/Generator

The following sections illustrate how to connect to the USB

Tracer

™/

Trainer

 or to the 

Voyager.

For USB 2, you need to plug into the Exerciser ports and loop through the Analyzer ports.

11.1.1 Connecting to USBTracer/Trainer

The connections differ for Host Emulation and Device Emulation.

Full Speed and Low Speed connections are the same. Hi Speed connections differ from 
Full Speed/Low Speed connections.

11.1.1.1 Full/Low Speed Host Emulation

For Host Emulation Full Speed or Low Speed, connect to the USB

Tracer/Trainer 

according to the following diagram. 

Summary of Contents for USB Protocol Suite Advisor T3





































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands