LeCroy LSA1000 Operator'S Manual Download Page 31

Page: 31 / 115

–

Installation and Safety

Symbol

Meaning

Earth (Ground) Terminal

Protective Conductor Terminal

Alternating Current Only

Chassis Terminal

Earth (Ground) Terminal on BNC Connectors

WARNING

Denotes a hazard. If a WARNING is indicated on the
instrument, do not proceed until its conditions are
understood and met (see also CAUTION).

WARNING

Any use of this instrument in a manner not specified by the
manufacturer may impair the instrument’s safety protection.

The  LSA1000  has  not  been  designed  to  make  direct
measurements  on  the  human  body.  Users  who  connect  a
LeCroy  instrument  directly  to  a  person  do  so  at  their  own
risk.

Power Requirements

The LSA1000 operates from a 115 V (90

–132 V) or 220 V (180–250 V)

AC (~) power source at 45

–66 Hz, and draws 200 W max power.

Summary of Contents for LSA1000




















































































































Search results

Summary of Contents for LSA1000

Reviews:

Related manuals for LSA1000

Brands by name

Popular brands

LeCroy LSA1000, Operator'S Manual

Search results

Summary of Contents for LSA1000

Reviews:

Related manuals for LSA1000

Brands by name

Popular brands