LeCroy LSA1000, Operator'S Manual, Page: 54 / 115

5 – 11
Performance Verification with
Remote LSA
Remote LSA
is the simplest way to run the LSA1000’s basic
operations
— without the need for remote control
commands. Thus we recommend that Remote LSA be used
for the initial performance verification of the LSA1000.
1. Ensure that your PC has the Ethernet connection
established with the LSA1000 (see Chapter 4).
2.
Connect the LSA1000’s “REF OUT” to “CH 1”.
3. Start Remote LSA.
4.
In the “Timbase + Trigger” panel click on
to set
the trigger to automatic.
5. Select channel
from the “Channel” panel.
6. The program should display a 10MHz square waveform
of approximately 400mV amplitude, as shown on the
next page.
This process using
Remote LSA is a simple means of verifiing
that the LSA1000 is working properly when first received.
Remote LSA is also recommended as a visual diagnostic tool
during LSA1000 program development.