LeCroy LSA1000, Operator'S Manual, Page: 46 / 115

5 – 3
Installing and Launching the Software
Included with the LSA1000 software tools on the CD-ROM are
the source codes for all the programs. Provided as reference
materials for software development, depending on the
application they can be directly copied into your program.
1. Insert the CD into a Windows 95 or NT computer.
Executable files (.exe) are available for Remote LSA,
ActiveDSO and ScopeExplorer, and each of their
program folders contains either a “setupex.exe” or
“setup.exe” file.
2.
Run the desired program’s “setupex.exe” file.
3. Follow the on-screen instructions to complete the
installation.
4. Ensure that the Ethernet connection between the PC
and LSA1000 is established (see Chapter 4).
5. Start Remote LSA.
6. After starting the program, you will be asked for the IP
address of the LSA1000, as shown in the following
dialog box. Select TCPIP under Type and enter the IP
address of the your LSA1000 unit.
7. Click Remote LSA will be launched and the
panel shown on the next page opened.
Note:
Because of the
similarities between
Windows™ 95 and
Windows™ NT, the
software tools provided
should work in both
system with minimal
configuration effort. For
PCs with Windows™ 3.1,
NET_CON should be
used as the base line
communication protocol
implementation on 16-bit
compilers.