HDO6000 High Definition Oscilloscope
l
On the Track right-hand dialog,
uncheck Auto Find Scale
and enter a new
Center
and
Height/div
.
View Trend
This procedure explains how to view the trend of a measurement parameter. A trend is a waveform
composed of a series of parameter measurements in the order the measurements were taken. The
vertical units are those of the source parameter, the horizontal unit is measurement number. The trend
contains a single value for each measurement.
Although the trend plots measurement values, the plot is drawn as a math function and controlled through
the Math dialog.
1. If you're not already on the Measure dialog, choose
Measure
→
Measure Setup...
.
2. Touch the
P
x
tab
for the parameter you wish to plot.
3. Touch the
Trend button
at the bottom of the dialog and choose a math function
F
x
in which to draw the
Trend.
The Trend is displayed in a new grid, along with its function descriptor box.
4. To rescale the Trend plot:
l
Touch the
Trend function descriptor box
to open the Math dialog, then touch the
Trend tab
at the
far right of the dialog.
l
On the Trend right-hand dialog, uncheck
Auto Find Scale
and enter the new
Center
and
Height
values.
86
922499 Rev B
