HDO6000 High Definition Oscilloscope
l
To replace a Trigger List setup with the setup on the Trigger dialog, highlight the setup in the
Trigger List and touch the
Update Selected
button.
l
To use a trigger from the Trigger List, highlight its corresponding row on the list, and then touch
the
Load Selected
button.
l
To delete a trigger setup, highlight the setup in the Trigger List and touch the
Delete Selected
button.
All trigger setups can be deleted regardless of selections on the Trigger List with one step by touching
the
Delete All
button.
3. Once you have made the desired changes to the Trigger List, touch the
Trainer button
and restart the
scan by touching the
Start Training
button on the Trigger Scan Trainer pop-up. The oscilloscope
automatically cycles through all the trigger setups.
NOTE
:
l
Use
Dwell Time
to tune the time that the oscilloscope waits before loading the next trigger.
l
If you want TriggerScan to stop when the oscilloscope next triggers, check the
Stop On Trigger
checkbox. You can use this to isolate trigger setups.
l
If you have Persistence enabled, all trigger events are recorded on the display.
Saving TriggerScan Setups
Save TriggerScan setups whenever you have modified the Trigger List. The current Trigger List is not
preserved after exiting the application unless you manually save it.
1. On the
TriggerScan
dialog, touch
Setup File Name
and enter a file name, or touch the
Browse
button
and select a location and file name.
2. Touch the
Save Setup...
button.
NOTE
: You can load previously saved TriggerScan setups by touching the
Browse
button, locating the file,
then touching
Load Setup...
.
48
922499 Rev B
