10. VIDEO SIGNAL WAVEFORM DISPLAY
78
10.3
Selecting Which Channels to Display
Pressing a front panel key from CH 1 to CH 3 turns on or off the display of the video signal
waveform assigned to that key. The video signal waveform display is on when a key is lit and
off when the key is not lit. By default, all of the video signal waveform displays are on.
This setting is invalid when COLOR MATRIX is set to COMPOSIT and when YGBR or YRGB
is set to ON. You cannot turn the displays for all the keys off.
For information on the COLOR MATRIX setting, see section 10.10.1, “Selecting the Display Format.”
Waveforms are assigned to the CH 1 to CH 3 keys as indicated below.
Table 10-1 Waveform assignments
COLOR MATRIX
CH 1
CH 2
CH 3
YCbCr Y
C
B
C
R
GBR G
B
R
RGB R
G
B
10.4
Setting the Display Mode
The video signal waveform display mode changes each time you press OVLAY on the front
panel.
When the OVLAY key is lit, the display mode is overlay (waveforms are overlaid), when the
OVLAY key is not lit, the display mode is parade (waveforms are shown side by side). The
default value is parade mode.
This setting is invalid when COLOR MATRIX is set to COMPOSIT.
For information on the COLOR MATRIX setting, see section 10.10.1, “Selecting the Display Format.”
OVLAY = OFF (parade mode)
OVLAY = ON (overlay mode)
Figure 10-2 Parade and overlay display modes
