11. VECTOR DISPLAY
100
8 Display
Format
The vector display format is indicated here as either COMPONENT or COMPOSITE.
11.2
Configuring Vector and Scale Settings
To configure vector and scale settings, press F•1 INTEN/SCALE on the vector menu.
F•1 INTEN/SCALE appears when DISPLAY is set to VECTOR.
For information on the DISPLAY setting, see section 11.6, “Switching between the Vector and 5-Bar
Displays.”
11.2.1
Turning the Display of the I and Q Axes On and Off
To display the I and Q axes, follow the procedure shown below.
When the input format is 625i/50, the I and Q axes will not be displayed even if you select
ON.
Procedure
VEC
→
F•1 INTEN/SCALE
→
F•1 IQ AXIS
Settings
ON:
The I and Q axes are displayed (this is the default value).
OFF:
The I and Q axes are not displayed.
IQ AXIS = ON
IQ AXIS = OFF
Figure 11-2 Turning the display of the I and Q axes on and off
