10. VIDEO SIGNAL WAVEFORM DISPLAY
96
RGB = ON
RGB = OFF
Figure 10-18 RGB display
10.10.4
Setting the Composite Display Format
To select the format for the pseudo-composite display, follow the procedure shown below.
Changing this setting will also change the format setting for the vector display.
Procedure
WFM
→
F•6 COLOR SYSTEM
→
F•4 COMPOSIT FORMAT
Settings
AUTO:
When the input signal frame/field rate is 50 Hz, the format is PAL. Otherwise,
the format is NTSC (this is the default value).
NTSC:
The format is NTSC. The scale shows percentages.
PAL:
The format is PAL. The scale shows voltages.
10.10.5
Setting the Setup Level
To set the setup level of the pseudo-composite display, follow the procedure below.
This setting is available when F•1 COLOR MATRIX is set to COMPOSIT and the
composite display format is set to NTSC.
Procedure
WFM
→
F•6 COLOR SYSTEM
→
F•5 SETUP
Settings
0%:
No setup level is added (this is the default value).
7.5%:
A setup level of 7.5 % is added.
SETUP = 0%
SETUP = 7.5%
Figure 10-19 Setup level
