5. SYSTEM SETTINGS
36
Select the scanning, and then select the frame (field) rate. The formats that you can
select are shown in the table below.
Table 5-1 Manual settings for single link format
Scanning Frame
(Field)
Rates
1080i
60 / 59.94 / 50
1080PsF
30 / 29.97 / 25 / 24 / 23.98
1080P
30 / 29.97 / 25 / 24 / 23.98
720P
60 / 59.94 / 50 / 30 / 29.97 / 25 / 24 / 23.98
525i 59.94
625i 50
5.1.2
Configuring Dual Link Settings
To set the input signal format to dual link, set Link Format to Dual (1920×1080) or 2k
(2048×1080).
Figure 5-3 Dual link settings
• Dual Link Format
For dual link signals, you have to manually set the input format. However, the field
(frame) rate is detected automatically.
The formats that you can select are shown in the table below. If you specify a
combination of settings that is not shown in this table, the “ILLEGAL FORMAT” error
message is displayed. Re-specify the format correctly.
Table 5-2 Manual settings for dual link format
Link Format
Color System
Pixel Depth
Scanning
GBR(4:4:4)
10bit / 12bit
1080i / 1080PsF / 1080P
10bit 1080P
Dual
YCbCr(4:2:2)
12bit
1080i / 1080PsF / 1080P
2k
GBR(4:4:4)
12bit
1080PsF / 1080P
