11. VECTOR DISPLAY
104
11.4.2
Selecting Lines
To select a line, follow the procedure below. The selected line is indicated in the lower left
of the display. If you press F•D 1, the selected line changes to the first video line.
You can select a line when F•1 LINE SELECT is set to ON. Changing this setting will also
change the selected line on the video-signal-waveform, picture, and status (data dump)
displays.
Procedure
VEC
→
F•3 LINE SEL
→
F•D 1 LINE VARIABLE
11.4.3
Setting the Line Selection Range
To set the line selection range, follow the procedure below.
The line selection range can be set when the input signal is interlace or segmented frame.
Changing this setting will also change the video-signal-waveform-display and
picture-display line selection ranges.
Procedure
VEC
→
F•3 LINE SEL
→
F•2 FIELD
Settings
(the examples are for the selectable ranges when the input format is set to 1080i/59.94)
FIELD1:
A line from field 1 can be selected. (Example: 1 to 563.)
FIELD2:
A line from field 2 can be selected. (Example: 564 to 1125.)
FRAME:
All lines can be selected (this is the default value). (Example: 1 to 1125.)
11.5
Configuring Display Format Settings
To configure display format settings, press F•4 COLOR SYSTEM on the vector menu. You
can set the vector display format and display a scale.
F•4 COLOR SYSTEM appears when DISPLAY is set to VECTOR.
For information on the DISPLAY setting, see section 11.6, “Switching between the Vector and 5-Bar
Displays.”
11.5.1
Selecting the Display Format
To select the vector display format, follow the procedure below.
The selected display format is indicated in the lower right of the display. (There is no
indication on the 5 bar display.)
Procedure
VEC
→
F•4 COLOR SYSTEM
→
F•1 COLOR MATRIX
Settings
COMPONEN: The component chrominance signal is displayed on the X and Y axes (this
is the default value).
COMPOSIT:
The component signal is converted into a composite signal, and the
composite signal’s chrominance signal is displayed on the X and Y axes.
